001/** 002 * Licensed to the Apache Software Foundation (ASF) under one 003 * or more contributor license agreements. See the NOTICE file 004 * distributed with this work for additional information 005 * regarding copyright ownership. The ASF licenses this file 006 * to you under the Apache License, Version 2.0 (the 007 * "License"); you may not use this file except in compliance 008 * with the License. You may obtain a copy of the License at 009 * 010 * http://www.apache.org/licenses/LICENSE-2.0 011 * 012 * Unless required by applicable law or agreed to in writing, software 013 * distributed under the License is distributed on an "AS IS" BASIS, 014 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 015 * See the License for the specific language governing permissions and 016 * limitations under the License. 017 */ 018package org.apache.oozie; 019 020import org.apache.oozie.util.XLog; 021 022public enum ErrorCode { 023 E0000(XLog.STD, "System property 'oozie.home.dir' not defined"), 024 E0001(XLog.OPS, "Could not create runtime directory, {0}"), 025 E0002(XLog.STD, "System is in safe mode"), 026 E0003(XLog.OPS, "Oozie home directory must be an absolute path [{0}]"), 027 E0004(XLog.OPS, "Oozie home directory does not exist [{0}]"), 028 029 E0010(XLog.OPS, "Could not initialize log service, {0}"), 030 E0011(XLog.OPS, "Log4j file must be a file name [{0}]"), 031 E0012(XLog.OPS, "Log4j file must be a '.properties' file [{0}]"), 032 E0013(XLog.OPS, "Log4j file [{0}] not found in configuration dir [{1}] neither in classpath"), 033 034 E0020(XLog.OPS, "Environment variable {0} not defined"), 035 E0022(XLog.OPS, "Configuration file must be a file name [{0}]"), 036 E0023(XLog.OPS, "Default configuration file [{0}] not found in classpath"), 037 E0024(XLog.OPS, "Oozie configuration directory does not exist [{0}]"), 038 E0025(XLog.OPS, "Configuration service internal error, it should never happen, {0}"), 039 E0026(XLog.OPS, "Missing required configuration property [{0}]"), 040 041 E0100(XLog.OPS, "Could not initialize service [{0}], {1}"), 042 E0101(XLog.OPS, "Service [{0}] does not implement declared interface [{1}]"), 043 E0102(XLog.OPS, "Could not instantiate service class [{0}], {1}"), 044 E0103(XLog.OPS, "Could not load service classes, {0}"), 045 E0104(XLog.OPS, "Could not fully initialize service [{0}], {1}"), 046 E0110(XLog.OPS, "Could not parse or validate EL definition [{0}], {1}"), 047 E0111(XLog.OPS, "class#method not found [{0}#{1}]"), 048 E0112(XLog.OPS, "class#method does not have PUBLIC or STATIC modifier [{0}#{1}]"), 049 E0113(XLog.OPS, "class not found [{0}]"), 050 E0114(XLog.OPS, "class#constant does not have PUBLIC or STATIC modifier [{0}#{1}]"), 051 E0115(XLog.OPS, "class#constant not found"), 052 E0116(XLog.OPS, "class#constant does not have PUBLIC or STATIC modifier [{0}#{1}]"), 053 E0120(XLog.OPS, "UUID, invalid generator type [{0}]"), 054 E0130(XLog.OPS, "Could not parse workflow schemas file/s, {0}"), 055 E0131(XLog.OPS, "Could not read workflow schemas file/s, {0}"), 056 E0140(XLog.OPS, "Could not access database, {0}"), 057 E0141(XLog.OPS, "Could not create DataSource connection pool, {0}"), 058 E0150(XLog.OPS, "Actionexecutor type already registered [{0}]"), 059 E0160(XLog.OPS, "Could not read admin users file [{0}], {1}"), 060 061 E0300(XLog.STD, "Invalid content-type [{0}]"), 062 E0301(XLog.STD, "Invalid resource [{0}]"), 063 E0302(XLog.STD, "Invalid parameter [{0}]"), 064 E0303(XLog.STD, "Invalid parameter value, [{0}] = [{1}]"), 065 E0304(XLog.STD, "Invalid parameter type, parameter [{0}] expected type [{1}]"), 066 E0305(XLog.STD, "Missing parameter [{0}]"), 067 E0306(XLog.STD, "Invalid parameter"), 068 E0307(XLog.STD, "Runtime error [{0}]"), 069 E0308(XLog.STD, "Could not parse date range parameter [{0}]"), 070 071 072 E0401(XLog.STD, "Missing configuration property [{0}]"), 073 E0402(XLog.STD, "Invalid callback ID [{0}]"), 074 E0403(XLog.STD, "Invalid callback data, {0}"), 075 E0404(XLog.STD, "Only one of the properties are allowed [{0}]"), 076 E0405(XLog.STD, "Submission request doesn't have any application or lib path"), 077 078 E0420(XLog.STD, "Invalid jobs filter [{0}], {1}"), 079 E0421(XLog.STD, "Invalid job filter [{0}], {1}"), 080 081 E0500(XLog.OPS, "Not authorized, {0}"), 082 E0501(XLog.OPS, "Could not perform authorization operation, {0}"), 083 E0502(XLog.OPS, "User [{0}] does not belong to group [{1}]"), 084 E0503(XLog.OPS, "User [{0}] does not have admin privileges"), 085 E0504(XLog.OPS, "App directory [{0}] does not exist"), 086 E0505(XLog.OPS, "App definition [{0}] does not exist"), 087 E0506(XLog.OPS, "App definition [{0}] is not a file"), 088 E0507(XLog.OPS, "Could not access to [{0}], {1}"), 089 E0508(XLog.OPS, "User [{0}] not authorized for WF job [{1}]"), 090 E0509(XLog.OPS, "User [{0}] not authorized for Coord job [{1}]"), 091 E0510(XLog.OPS, "Unable to get Credential [{0}]"), 092 093 E0550(XLog.OPS, "Could not normalize host name [{0}], {1}"), 094 E0551(XLog.OPS, "Missing [{0}] property"), 095 096 E0600(XLog.OPS, "Could not get connection, {0}"), 097 E0601(XLog.OPS, "Could not close connection, {0}"), 098 E0602(XLog.OPS, "Could not commit connection, {0}"), 099 E0603(XLog.OPS, "SQL error in operation, {0}"), 100 E0604(XLog.STD, "Job does not exist [{0}]"), 101 E0605(XLog.STD, "Action does not exist [{0}]"), 102 E0606(XLog.STD, "Could not get lock [{0}], timed out [{1}]ms"), 103 E0607(XLog.OPS, "Other error in operation [{0}], {1}"), 104 E0608(XLog.OPS, "JDBC setup error [{0}], {1}"), 105 E0609(XLog.OPS, "Missing [{0}] ORM file [{1}]"), 106 E0610(XLog.OPS, "Missing JPAService, StoreService cannot run without a JPAService"), 107 E0611(XLog.OPS, "SQL error in operation [{0}], {1}"), 108 109 E0700(XLog.STD, "XML error, {0}"), 110 E0701(XLog.STD, "XML schema error, {0}"), 111 E0702(XLog.STD, "IO error, {0}"), 112 E0703(XLog.STD, "Invalid workflow element [{0}]"), 113 E0704(XLog.STD, "Definition already complete, application [{0}]"), 114 E0705(XLog.STD, "Nnode already defined, node [{0}]"), 115 E0706(XLog.STD, "Node cannot transition to itself node [{0}]"), 116 E0707(XLog.STD, "Loop detected at parsing, node [{0}]"), 117 E0708(XLog.STD, "Invalid transition, node [{0}] transition [{1}]"), 118 E0709(XLog.STD, "Loop detected at runtime, node [{0}]"), 119 E0710(XLog.STD, "Could not read the workflow definition, {0}"), 120 E0711(XLog.STD, "Invalid application URI [{0}], {1}"), 121 E0712(XLog.STD, "Could not create lib paths list for application [{0}], {1}"), 122 E0713(XLog.OPS, "SQL error, {0}"), 123 E0714(XLog.OPS, "Workflow lib error, {0}"), 124 E0715(XLog.OPS, "Invalid signal value for the start node, signal [{0}]"), 125 E0716(XLog.OPS, "Workflow not running"), 126 E0717(XLog.OPS, "Workflow not suspended"), 127 E0718(XLog.OPS, "Workflow already completed"), 128 E0719(XLog.OPS, "Job already started"), 129 E0720(XLog.OPS, "Fork/join mismatch, node [{0}]"), 130 E0721(XLog.OPS, "Invalid signal/transition, decision node [{0}] signal [{1}]"), 131 E0722(XLog.OPS, "Action signals can only be OK or ERROR, action node [{0}]"), 132 E0723(XLog.STD, "Unsupported action type, node [{0}] type [{1}]"), 133 E0724(XLog.STD, "Invalid node name, {0}"), 134 E0725(XLog.STD, "Workflow instance can not be killed, {0}"), 135 E0726(XLog.STD, "Workflow action can not be killed, {0}"), 136 E0727(XLog.STD, "Workflow Job can not be suspended as its not in running state, {0}, Status: {1}"), 137 E0728(XLog.STD, "Coordinator Job can not be suspended as job finished or failed or killed, id : {0}, status : {1}"), 138 E0729(XLog.OPS, "Kill node message [{0}]"), 139 E0730(XLog.STD, "Fork/Join not in pair"), 140 E0731(XLog.STD, "Fork node [{0}] cannot have less than two paths"), 141 E0732(XLog.STD, "Fork [{0}]/Join [{1}] not in pair (join should have been [{2}])"), 142 E0733(XLog.STD, "Fork [{0}] without a join"), 143 E0734(XLog.STD, "Invalid transition from node [{0}] to node [{1}] while using fork/join"), 144 E0735(XLog.STD, "There was an invalid \"error to\" transition to node [{1}] while using fork/join"), 145 E0736(XLog.STD, "Workflow definition length [{0}] exceeded maximum allowed length [{1}]"), 146 E0737(XLog.STD, "Invalid transition from node [{0}] to node [{1}] -- nodes of type 'end' are not allowed within Fork/Join"), 147 E0738(XLog.STD, "The following {0} parameters are required but were not defined and no default values are available: {1}"), 148 E0739(XLog.STD, "Parameter name cannot be empty"), 149 E0740(XLog.STD, "Invalid node type encountered (node [{0}])"), 150 E0741(XLog.STD, "Cycle detected transitioning to [{0}] via path {1}"), 151 E0742(XLog.STD, "No Fork for Join [{0}] to pair with"), 152 E0743(XLog.STD, "Multiple \"ok to\" transitions to the same node, [{0}], are not allowed"), 153 E0744(XLog.STD, "A fork, [{0}], is not allowed to have multiple transitions to the same node, [{1}]"), 154 155 E0800(XLog.STD, "Action it is not running its in [{1}] state, action [{0}]"), 156 E0801(XLog.STD, "Workflow already running, workflow [{0}]"), 157 E0802(XLog.STD, "Invalid action type [{0}]"), 158 E0803(XLog.STD, "IO error, {0}"), 159 E0804(XLog.STD, "Disallowed default property [{0}]"), 160 E0805(XLog.STD, "Workflow job not completed, status [{0}]"), 161 E0806(XLog.STD, "Action did not complete in previous run, action [{0}]"), 162 E0807(XLog.STD, "Some skip actions were not executed [{0}]"), 163 E0808(XLog.STD, "Disallowed user property [{0}]"), 164 E0809(XLog.STD, "Workflow action is not eligible to start [{0}]"), 165 E0810(XLog.STD, "Job state is not [{0}]. Skipping ActionStart Execution"), 166 E0811(XLog.STD, "Job state is not [{0}]. Skipping ActionEnd Execution"), 167 E0812(XLog.STD, "Action pending=[{0}], status=[{1}]. Skipping ActionEnd Execution"), 168 E0813(XLog.STD, "Workflow not RUNNING, current status [{0}]"), 169 E0814(XLog.STD, "SignalCommand for action id=[{0}] is already processed, status=[{1}], , pending=[{2}]"), 170 E0815(XLog.STD, "Action pending=[{0}], status=[{1}]. Skipping ActionCheck Execution"), 171 E0816(XLog.STD, "Action pending=[{0}], status=[{1}]. Skipping ActionStart Execution"), 172 E0817(XLog.STD, "The wf action [{0}] has been udated recently. Ignoring ActionCheck."), 173 E0818(XLog.STD, "Action [{0}] status is running but WF Job [{1}] status is [{2}]. Expected status is RUNNING or SUSPENDED."), 174 E0819(XLog.STD, "Unable to delete the temp dir of job WF Job [{0}]."), 175 E0820(XLog.STD, "Action user retry max [{0}] is over system defined max [{1}], re-assign to use system max."), 176 177 E0900(XLog.OPS, "Jobtracker [{0}] not allowed, not in Oozie's whitelist"), 178 E0901(XLog.OPS, "Namenode [{0}] not allowed, not in Oozie's whitelist"), 179 E0902(XLog.OPS, "Exception occured: [{0}]"), 180 E0903(XLog.OPS, "Invalid JobConf, it has not been created by HadoopAccessorService"), 181 E0904(XLog.STD, "Scheme [{0}] not supported in uri [{1}]"), 182 E0905(XLog.STD, "Scheme not present in uri [{0}]"), 183 E0906(XLog.STD, "URI parsing error : {0}"), 184 185 E1001(XLog.STD, "Could not read the coordinator job definition, {0}"), 186 E1002(XLog.STD, "Invalid coordinator application URI [{0}], {1}"), 187 E1003(XLog.STD, "Invalid coordinator application attributes, {0}"), 188 E1004(XLog.STD, "Expression language evaluation error, {0}"), 189 E1005(XLog.STD, "Could not read the coordinator job configuration read from DB, {0}"), 190 E1006(XLog.STD, "Invalid coordinator application [{0}], {1}"), 191 E1007(XLog.STD, "Unable to add record for SLA. [{0}], {1}"), 192 E1008(XLog.STD, "Not implemented. [{0}]"), 193 E1009(XLog.STD, "Unable to parse XML response. [{0}]"), 194 E1010(XLog.STD, "Invalid data in coordinator xml. [{0}]"), 195 E1011(XLog.STD, "Cannot update coordinator job [{0}], {1}"), 196 E1012(XLog.STD, "Coord Job Materialization Error: {0}"), 197 E1013(XLog.STD, "Coord Job Recovery Error: {0}"), 198 E1014(XLog.STD, "Coord job change command not supported"), 199 E1015(XLog.STD, "Invalid coordinator job change value {0}, {1}"), 200 E1016(XLog.STD, "Cannot change a killed coordinator job"), 201 E1017(XLog.STD, "Cannot change a workflow job"), 202 E1018(XLog.STD, "Coord Job Rerun Error: {0}"), 203 E1019(XLog.STD, "Could not submit coord job, [{0}]"), 204 E1020(XLog.STD, "Could not kill coord job, this job either finished successfully or does not exist , [{0}]"), 205 E1021(XLog.STD, "Coord Action Input Check Error: {0}"), 206 E1022(XLog.STD, "Cannot delete running/completed coordinator action: [{0}]"), 207 E1023(XLog.STD, "Coord Job update Error: [{0}]"), 208 E1024(XLog.STD, "Cannot run ignore command: [{0}]"), 209 210 E1100(XLog.STD, "Command precondition does not hold before execution, [{0}]"), 211 212 E1101(XLog.STD, "SLA <{0}> cannot be empty."), 213 214 E1201(XLog.STD, "State [{0}] is invalid for job [{1}]."), 215 216 E1301(XLog.STD, "Could not read the bundle job definition, [{0}]"), 217 E1302(XLog.STD, "Invalid bundle application URI [{0}], {1}"), 218 E1303(XLog.STD, "Invalid bundle application attributes [{0}], {1}"), 219 E1304(XLog.STD, "Duplicate bundle application coordinator name [{0}]"), 220 E1305(XLog.STD, "Empty bundle application coordinator name."), 221 E1306(XLog.STD, "Could not read the bundle job configuration, [{0}]"), 222 E1307(XLog.STD, "Could not read the bundle coord job configuration, [{0}]"), 223 E1308(XLog.STD, "Bundle Action Status [{0}] is not matching with coordinator previous status [{1}]."), 224 E1309(XLog.STD, "Bundle Action for bundle ID [{0}] and Coordinator [{1}] could not be update by BundleStatusUpdateXCommand"), 225 E1310(XLog.STD, "Bundle Job submission Error: [{0}]"), 226 E1311(XLog.STD, "Bundle Action for bundle ID [{0}] not found"), 227 E1312(XLog.STD, "Bundle Job can not be suspended as job finished or failed or killed, id : {0}, status : {1}"), 228 E1313(XLog.STD, "Bundle Job can not be changed as job finished, {0}, Status: {1}"), 229 E1314(XLog.STD, "Bundle Job can not be changed as job does not exist, {0}"), 230 E1315(XLog.STD, "Bundle job can not be paused, {0}"), 231 E1316(XLog.STD, "Bundle job can not be unpaused, {0}"), 232 E1317(XLog.STD, "Invalid bundle job change value {0}, {1}"), 233 E1318(XLog.STD, "No coord jobs for the bundle=[{0}], fail the bundle"), 234 E1319(XLog.STD, "Invalid bundle coord job namespace, [{0}]"), 235 E1320(XLog.STD, "Bundle Job change error, [{0}]"), 236 237 E1400(XLog.STD, "doAs (proxyuser) failure"), 238 239 E1501(XLog.STD, "Error in getting HCat Access [{0}]"), 240 241 E1601(XLog.STD, "Cannot retrieve JMS connection info [{0}]"), 242 E1602(XLog.STD, "Cannot retrieve Topic name [{0}]"), 243 E1603(XLog.STD, "Invalid user request"), 244 245 E1700(XLog.STD, "Issue communicating with ZooKeeper: {0}"), 246 ETEST(XLog.STD, "THIS SHOULD HAPPEN ONLY IN TESTING, invalid job id [{0}]"),; 247 248 private String template; 249 private int logMask; 250 251 /** 252 * Create an error code. 253 * 254 * @param template template for the exception message. 255 * @param logMask log mask for the exception. 256 */ 257 private ErrorCode(int logMask, String template) { 258 this.logMask = logMask; 259 this.template = template; 260 } 261 262 /** 263 * Return the message (StringFormat) template for the error code. 264 * 265 * @return message template. 266 */ 267 public String getTemplate() { 268 return template; 269 } 270 271 /** 272 * Return the log mask (to which log the exception should be logged) of the error. 273 * 274 * @return error log mask. 275 */ 276 public int getLogMask() { 277 return logMask; 278 } 279 280 /** 281 * Return a templatized error message for the error code. 282 * 283 * @param args the parameters for the templatized message. 284 * @return error message. 285 */ 286 public String format(Object... args) { 287 return XLog.format("{0}: {1}", toString(), XLog.format(getTemplate(), args)); 288 } 289 290}